Hydroalcoholic gel dispenser

Specially designed for hygienic environments, our range of distribution of hydroalcoholic gel will allow you to combine safety and practicality at a lower cost. Stainless steel construction for all our distributors. Compatible with gel and liquid solutions.  Alcohol gel dispenser : Tube Ø 63.5 mm, brushed finish. Visible gel level. Filling of the pump tank […]

Water fountains

Beneficial for everyone’s health and well-being, Tournus Equipement water fountains are available in two models : a water fountain that fits into Tournus neutral furniture and a wall-mounted water fountain. Easy to use : push-button integrated into the tap. Intuitive operation, suitable for foodservice. Water savings :  Controlled distribution, with no water wastage. Controlled dispensing, […]

Catering tables

Safety and aesthetics: straight edge strip height 40 mm, flattened edges. Flattened folds throughout the worktop, splashback and shelf to avoid any risk of cuts. Rigidity :worktop thickness 1.2 mm, covered with a laminated water-repellent panel with an aluminium frame. Easy to assemble: self-locking interlocking parts. Patented system. Easy to install: legs set back from the rear […]

Tall catering

Stainless steel construction.
Height 1800 mm.
Reinforced sliding doors, suspended from a rail fixed on the upper part, with stop-blocks.
Horizontal top. 3 adjustable shelves. Polyamide leg with jacks with no exposed thread.
Flattened folds used thoughout, on the front edge and shelves.

Catering cupboard for cleaning products

Stainless steel construction. Height 1800 mm. Reinforced hinged doors with lock. Horizontal top. 3 adjustable shelves + 1 fixed shelf Polyamide legs with jacks with no exposed thread. Flattened folds on shelves and floor. PDF leaflet The Tournus advantage 1-door cupboard with vertical separator

Wall shelving

Made of stainless steel. Shelf deck 1,2 mm thick. Load: 100 kg (depending on the wall type) Simple to install: separate shelves, fixed by screws and wall anchors in the wall. Recessed from the wall by 40 mm for pipework. Modular: optional container support (containers supplied). Several shelves can be mounted vertically for multiple levels or […]

Units

Stainless steel construction, height 900 mm (+0/65 mm). Top surface lined with waterproof laminated panel Folded splashback height 100 mm, front strip height 40 mm. Adjustable middle shelf. Reinforced sliding doors, suspended from a rail fixed on the upper part, with end of travel buffer. Polyamide legs, height 155 mm with jacks with no exposed thread. […]

Wall cabinets

Stainless steel construction, height 600 mm. Adjustable middle shelf. Sliding doors, suspended from a rail fixed to the upper part, with end of travel buffer. Flattened folds on the edge strip, shelf, handles and floor. Fixed to wall using 2 supports. PDF leaflet The Tournus advantage armoire suspendue CHR 503 564

Catering sinks

Acoustic comfort: soundproofed bowl and drainer. Design: strip 40 mm high and folded upstand identical to those of the tables and units in the range. Easy to assemble: legs and bowl guard fitted using screws. Easy to install: legs set back from the rear (80 mm) for positioning against a wall. Wide range: Sinks with 400 […]

Ergonomix worktops

Ergonomix is an adaptable worktop. It allows everyone to work at the height that suits them, depending on their size or their task. Ergonomix helps reduce the risk of musculoskeletal injury which are now the leading cause of work stoppages. Simple of use : manual operation of the crank makes it possible to raise or lower […]

HybridStand counters

HybribStand a major innovation for fish sales in supermarkets :  assisted sales for fresh fish or filet fish on ice bed and take away for packaged fish. HybridStand has been especially designed for the display and the preservation of the fish in both forms. Flexibility is optimal. The counter can be easily and quickly transformed […]

Waste sorting

Waste management in the dining area is increasingly frequent, and often involves very young school children. In addition to its educational aspect, the pre-sorting unit also saves time for the washing up staff. Tournus has developed a complete range of units and tables to help in waste management before plates and cutlery are brought to the […]

Press-drawn sinks

Tournus offers a wide range of sinks produced as standard and to custom specifications. The front edge and splashback angles are rounded in the same way as the tables and stainless steel units, creating a uniform look across the range. General specifications Stainless steel construction. Height 900 mm (height 850 mm on request). Splashback height […]

Catering units

The very wide range of stainless steel units from Tournus Equipment, both standard and custom products, meets professional requirements in terms of robustness, hygiene and safety. Stainless steel construction. Adjustable height 900 (+ 0/50 mm). Reinforced worktop with waterproof laminated panel. Rounded front edge, height 60 mm. One adjustable shelf. Reinforced inner panel, reinforced sliding […]

Oréo3

Schools, corporations, government buildings, leisure facilities: this range meets the needs of collective or commercial catering organisations serving large numbers of covers every day. The range consists of stainless steel furniture with decorative cladding and tray rails. Units can be arranged in line or separately.

TS 2000N

A complete, attractive range. The basin, apron and splashback of the TS2000N are all produced as a single piece, giving the product its elegant lines. It incorporates all the functions you need: built-in soap dispenser, nailbrush with chain and bin for disposing of hand towels. Basin 350 x 275 mm, depth 80 mm. Hot/cold mixer […]

Rack shelving

Unmatched speed and ease of assembly: one person can assemble 5 metres in 5 minutes with no tools. This innovative design of shelving is very rigid thanks to its self-locking fit, and has excellent durability over time. Tournus Equipement shelving consists of aluminium uprights and polypropylene shelves. Quick and easy to assemble with no tools […]

Mariteam counters

For optimum control over seafood temperature. The cold is produced by a static evaporator at the rear top of the counter: as it descends, the cold air envelops the products on display without increasing the risk of drying. Made of food-grade stainless steel. Custom lengths and layouts based on plans. Counters can be produced at […]

Serving trolleys

Tournus produces a wide range of serving trolleys for many different uses. The range includes a variety of dimensions and characteristics: trolleys with one or two handles, guard rails and useful additions such as cutlery containers, waste bins and storage covers. Even easier to use Gastronorm shelves : The 800 x 530 mm shelf dimensions of […]

Mobile bag holders

For storing and removing kitchen waste, the Tournus Equipement bag holder design combines three qualities that guarantee the durability of these products: robustness, ease of use and hygiene. The new range of mobile bag holders for waste collection and disposal comes in 2 heights and 3 versions: 900 mm for general use 700 mm to fit under […]